This varies by climate, so check with your local building department for the recommended depth in your area.
If a water supply is not available, you must run a new line to the water hydrant location.
You will also need to know if the area you’re planning to install a hydrant is aneasement.
Jeremy Poland / Getty Images
Use only ahand shovelto prevent accidental damage to the pipe.
Permanently load the tee into the supply pipe with PVC solvent glue, following the manufacturer’s directions.
This helps ensure the valve does not easily clog with dirt that can come in from the sides.
Aaron Stickley
Test-fit (without glue) all fittings to double-check everything fits correctly.
Glue all of thePVC pipes and fittingstogether, using solvent glue.
Let the glue cure as directed by the manufacturer.
Aaron Stickley
Turn on the water and inspect all connections for leaks.
Yes, there are a few reasons there could be an underground leak.
Causes could be a faulty, cracked, corroded, or worn bottom valve assembly orpoor water supply piping.
Aaron Stickley
It’s best to call in a professional to evaluate and repair the situation.
Aaron Stickley
