Some kinds of drain stoppers can make it rather tricky tounclog the draindue tohair and debris.
Push-and-Pull
A push-and-pull stopper is pushed down to close it and pulled up to open it.
The stopper body is attached to the drain with a screw found under the cap of the stopper.
The Spruce / Kelly Miller
A push-and-pull stopper is an inexpensive and simple mechanical design that rarely requires much repair.
This stopper is inexpensive and relatively trouble-free.
However, the spring mechanism eventually wears out with use.
The Spruce /Christopher Lee Foto
Rubber or silicone O-rings underneath move to create or release a watertight seal.
This stopper is inexpensive and easily installed with no tools.
To install it, simply push it into the drain.
The Spruce /Christopher Lee Foto
Though relatively low-maintenance, the O-rings will wear out and need replacing.
Trip-Lever
Thetrip-lever stopperopens and closes by flipping a lever on the overflow drain.
It’s one of few bathtub stoppers that remain flat on the tub’s floor.
The Spruce /Christopher Lee Foto
There is no visible pop-up stopper in the drain openingjust a strainer.
This drain stopper is relatively inexpensive, though installation and maintenance can be complicated.
It is somewhat tricky to remove for cleaning.
The Spruce /Christopher Lee Foto
It must be extracted by pulling it up through the overflow tube and out of the overflow plate.
When the lever is moved, an internal rod moves the pop-up stopper up or down.
A tub pop-up stopper is inexpensive, though installation and maintenance can be complicated.
The Spruce /Christopher Lee Foto
The complexity of the mechanism makes it difficult to fix.
Also, this stopper jot down tends to collect hair and debris.
The name comes from their vaguely mushroom-like shape.
The Spruce /Christopher Lee Foto
They wedge tightly into drains, catching hair and other debris.
Dome-shaped TubShrooms bridge obstructions.
These simple drain stoppers are affordable and get the job done quickly.
The Spruce / Kevin Norris
StopShrooms and other silicone stoppers from this brand come in white, black, blue, and green.
It’s relatively easy to exchange a lever design for one without a lever.
When choosing a drain stopper, consider ease of use.
For example, some people prefer a toe-touch stopper because they can open and close it without bending over.
Finally, you’ll have to consider what your drain can accommodate.
A flip-it stopper, for instance, cannot be plugged into drains with built-in strainers.
it’s possible for you to identify your drain stopper by the way it opens and closes.
Bathtub drain threads differ by tub key in.
Bathtub drain flanges have either fine or coarse threads.
A universal drain flange that fits either fine or coarse threads can be purchased.
