These faucets are usually categorized as lavatory or basin faucets.
The shutoff valves are closed when you turn the handles clockwise as far as they will go.
Check to see to it that the water is turned off by turning on the faucet valves.
The Spruce / Kevin Norris
It is not uncommon for shutoff valves to grow old and stop functioning correctly.
It also means you will need to replace the fixture shutoff valves as part of yourfaucet replacementproject.
Ensure the Water Is Shut Off
Double-check that the water is completely off before beginning.
The Spruce / Kevin Norris
The supply tubes may be flexible tubes or rigid chromed copper tubes.
In rare cases, the supply tubes may be soldered to the shutoff valves.
Here, you might cut through the supply tubes with a hacksaw or tubing cutter.
The Spruce / Kevin Norris
Repeat with the mounting nut on the other tailpiece.
Double-check that the water is completely off.
Place a bucket under the supply tube connections to catch any water that may spill as you work.
The Spruce / Kevin Norris
Remove Handles and Spout
Working from above, remove the valve handles and spout from the faucet.
Look for a hidden set screw that holds the handle or handles in place.
There may be nuts at both handle locations, as well as at the spout.
The Spruce / Kevin Norris
Use channel-throw in pliers to remove the mounting nuts.
Do the same for the spout mounting nut, if there is one.
Remove the faucet body from under the sink.
The Spruce / Kevin Norris
The Spruce / Kevin Norris
The Spruce / Kevin Norris
The Spruce / Kevin Norris
The Spruce / Kevin Norris
