you could actually make one yourself.
Learn how to make a tufted headboard in the span of just one afternoon by following these easy steps.
you could use a roll of paper to create a template so you could visualize it.
The Spruce / Jacob Fox
Standard widths for headboards:
Whenselecting your fabric, turn to the upholstery section of the fabric store.
You’ll want to look for thick, wide-bolt fabric (at least 54 inches wide).
Natural fibers, like cotton and linen, are great choices.
The Spruce / Jacob Fox
For the padding, look for a polyurethane foam that’s 2 inches or thicker.
Want more design inspiration?
Most hardware stores will cut the board to the correct size for free or a small fee.
The Spruce / Jacob Fox
Start the first row about 2.5 inches below the top of the headboard.
Determine how far apart you want each button.
After marking your first row, line out another row about 4.5 inches below it.
The Spruce / Jacob Fox
Off-set the buttons on this row, otherwise you will just form a grid.
Repeat until you fill the span of your headboard and end up with a diamond pattern.
Drill Button Holes
Drill the button holes using a bit that is larger than the upholstery needle.
The Spruce / Jacob Fox
You only need to be able to get the needle through the whole, not the entire button.
Cut and Apply Your Foam
Cut the foam to the same size as the headboard.
Use a straight edge and measuring tape to draw the template and a hot foam knife to cut it.
The Spruce / Jacob Fox
Apply it to the plywood using spray adhesive and let dry.
Cover With Batting
Lay your batting on a flat surface.
Place the board on top with the foam side facing down.
The Spruce / Jacob Fox
Staple the Batting and Fold Corners
Begin stapling it to the plywood.
Work your way from the center of the long sides out to the corners.
Pull the batting tight between each staple.
The Spruce / Jacob Fox
Then, attach staples on the short sides.
For the corners, fold and tuck the fabric the way you would a present and apply a staple.
If you choose a fabric with a pattern, you’ll need to check that it lines up properly.
The Spruce / Jacob Fox
Always double-check your fabric is clean and wrinkle-free before attaching it to the board.
Next, draw a grid for the buttons on the fabric that aligns with the drill holes.
Then, wrap the wire several times through the staple, and apply an additional staple for extra support.
The Spruce / Jacob Fox
Repeat this process for each button.
Additionally, you don’t need to add legs to your headboard if you go the wall-mounting route.
A tufted headboard is a great option because it’s timeless.
The Spruce / Jacob Fox
Additionally, it blends well with any jot down of interior design style.
Making your own headboard is typically more cost-effective than purchasing a new one.
Linen is a great choice for a tufted headboard.
Since it’s a natural fiber, it’s breathable and has antimicrobial properties.
Just be sure to shop the upholstery section of the fabric store to find a durable version.
