Removing anexisting dishwasheris the first step wheninstalling a new dishwasher, remodeling, or rearranging the kitchen footprint.
With hidden brackets and floor obstructions, a dishwasher can be tricky to remove.
But with two basic tools, you should be able to uninstall a dishwasher in about an hour.
The Spruce / Ana Cadena
Safety Considerations
Dishwasherspresent a dangerous tipping hazard when the door is open.
Need more help?
Sometimes there are mounting screws that hold it in place.
Turn out the screws with a hand screwdriver or use a cordless drill.
On other models, the faceplate may be held in place with simple spring clips.
Disconnect the Water Supply
Behind the faceplate is a metal water supply line.
Disconnect this line from the dishwasher with the wrench.
It may run upward to connect to an air gap fitting mounted to the sink or countertop.
If so, detach the hose at this point.
What Is an Air Gap?
initiate the dishwasher door and look under the lip of the kitchen counter to find these brackets.
Remove the screws holding the dishwasher in place.
Remove the Dishwasher
Lift the dishwasher slightly to help the legs dump the edge of the floor.
You may want to protect the flooring with a canvas drop cloth as you slide the dishwasher out.
Often, you’re free to dispose of large appliances for no cost through these programs.
It takes about one to two hours to remove and install a dishwasher.
Removing a dishwasher takes about one hour.
If the flooring does not permit removal, the job can take significantly longer.
You canadd cabinetrythat matches the rest of the kitchen or create custom shelving.
It also can be a good spot for a trash can or rolling storage containers.
