This allows you to quicklyfinish drywalland move onto the painting stage.
This is because texturing drywall effectively eliminates imperfections by making the entirety of the surface intentionally imperfect.
Below, we’ve outlined the best ways to skip trowel texture walls and ceilings.
bbeltman / Getty Images
What Is Skip Trowel Texture?
Similar to knockdown texture, skip trowel texture has wider spacing and imitates a stuccoed surface.
You should be aiming for the same general skip trowel texture look regardless of which software method you choose.
Why Should You Texture Drywall?
The two main reasons for texturing drywall are taste and ease.
Some people simply prefer the look oftextured drywall, as it fits well with certain interior aesthetics.
This is especially valuable on ceilings, which can be difficult to achieve a smooth finish without obvious imperfections.
This is why you often seetextured ceilingslike knockdown,popcorn, stomp, and many others.
Should You Add Sand When Skip Trowel Texturing?
So, should you add sand when applying skip trowel texture?
The answer comes down to what you want your final surface to look like.
The choice mostly comes down to preference and determining which method is easiest for you.
If necessary, gradually add more water until you reach the consistency of thick pancake batter.
Put Joint Compound on Hawk
Put some joint compound on your hawk.
Use a sharp, sweeping motion to spread the joint compound across the surface.
The key is to spread a small amount of joint compound across a large surface.
This will cause the joint compound to stick in some spots while leaving the drywall exposed in others.
Rather than going back and covering the bare drywall left behind, move to a new spot.
Experiment With system Technique
As mentioned above, there’s an art to applying skip trowel texture.
Some people find it easiest to apply the mud in random directions.
Fix Any Mistakes
Take a step back and look for any spots that look unnatural.
These spots may be revealing too much bare drywall or may have too much joint compound.
For bare spots, you might often just dab some mud in place to match the surroundings.
If necessary, gradually add more water until you reach the consistency of thick pancake batter.
Fill the Mud Pan
Transfer some of the thinned joint compound into a drywall mud pan.
When applying skip trowel texture, part of the learning curve is learning which tools work best for you.
Some people may prefer a traditional trowel, while others may find that a standard taping knife works best.
Experiment with your joint compound program technique, just as you would if using a standard trowel.
Painting textured drywall is much like painting standard drywall.
This is because drywall and joint compound soaks up a lot of paint.
