If your scissors are a rarely used household tool, an annual sharpening should suffice.
How to Sharpen Scissors With Aluminum Foil
Sharpening scissors withaluminumfoil is quick and inexpensive.
Use foil to clean scissor blades and remove built-up dirt that dulls their sharpness.
bin kontan / Getty Images
Here’s how:
Gather and Fold the Foil.
Cut a piece of foil that’s between eight and 12 inches in length.
Take your scissors and cut through the thick strip.
How to Sharpen Scissors With Sandpaper
Therough texture of sandpaperworks against blunt scissor blades to restore sharpness.
All you need is a small piece of sandpaper and your scissors will be as good as new.
Here’s how:
Gather and Fold the Sandpaper.
You will need a piece of sandpaper with 150200 grit; the finer the sandpaper, the better.
Clean the scissors with a damp cloth.
Here’s how:
Take the Scissors Apart.
Disassemble your scissors by removing the middle screw that holds the two blades together.
This way, you’ll be able to sharpen and clean each blade on the stone individually.
Prep the stone by rubbing it with a honing oil that’s specifically designed to lubricate the stone.
Alternatively, you might also use water or any other kind of oil.
Choose Coarse or Fine Grit.
Use the coarse side for very dull scissors and the fine side for scissors that are only slightly dull.
Repeat the same motion up to 20 times, or until the blade is sharp.
Here’s how:
Cut the Sides of the Jar.
Cut the outside of the jar using a pulling motion.
Be careful as you do so and wear protective gloves to prevent accidents.
It can be used to sharpenvarious blades, including knives and scissors.
This way, you’ll be able to sharpen each blade individually.
Reassemble the scissors.Put scissors together by tightening the central screw holding the two blades together.
How to Sharpen Scissors With a Screwdriver
Asimple screwdriverdoubles as a way to sharpen scissors.
Get razor-sharp blade edges with a quick cut-and-pull motion.
This depends on how frequently you use the scissors and their condition.
Yes, a knife sharpener can be used to sharpen scissors.
Take the scissors apart, and carefully the drag the blades over a knife sharpener ten times each.
Professional scissor sharpening does exist, and the process could cost somewhere around $10 to $15.
This may be ideal if you require sharp scissors for work.
