Should you continue the chip and scrape the paint away or should you attempt to repair the chipped area?
In some cases, you might simplypaint over the chipped area.
The fix works well for small areas of chipped paint and the cost is minimal.
Joseph Sohm / Getty Images
The product will be flush with the surface or slightly higher than the surface.
The area is sanded down smoothly to match the rest of the surface.
Finally, the repair and the surrounding area are primed and painted.
pablohart / Getty Images
Interior areas like baseboards, door casing, and window sills can be fixed this way.
Wood Putty
Water-basedwood filleris a lightweight product best for interiors.
By contrast, oil-based wood putty is tough and exterior-appropriate.
Lee Wallender
While wood putty is difficult to sand, this attests to its strength.
Wood putty cannot be left uncoated in exterior applications; it must be coated.
If you are staining the repaired area to match the surrounding natural wood, use wood putty.
Lee Wallender
Wood putty comes in a few basic wood-like colors, plus it can also be primed and painted.
Acrylic Latex Filler
Exterior acrylic latex filler cures to a hard finish.
The finish is sandable.
Lee Wallender
Acrylic latex filler, true to its name, has a waterproof plastic-like feeling.
Most acrylic latex fillers are white.
If it does contain lead, have the paint removed by a qualified remediation company.
Lee Wallender
Stop scraping when it becomes too difficult to pry away the paint.
Also, take care not to gouge or damage the wood with the sharp edges of the scraper.
Brush Away Loose Paint
With a wire brush, vigorously sweep away remaining debris from the area.
Lee Wallender
Work the edges of the damaged area once again.
If more paint begins to peel, go back and pry it away with the paint scraper.
As long as the edges of the chip are solid, you should be able to repair the chip.
Lee Wallender
check that that the wood putty extends slightly beyond the perimeter of the damaged area.
This excess wood putty will later be sanded away.
Be sure to flex the putty knife to produce a flat surface.
Do not apply the wood putty thickly as this will only be more material for you to sand away.
Apply only enough to cover the damaged section, plus just a bit higher.
Avoid sanding down all the way to bare wood.
The patched area should blend in with the surrounding paint.
If the wood putty is not flush with the surrounding wood, repeat the earlier steps.
Priming the entire surface will help the filled area blend in perfectly when you apply paint.
In some cases, it’s possible for you to paint over chipped paint.
If the surface is badly damaged, the paint should be scraped away.
Mason LH, Harp JP, Han DY.Pb neurotoxicity: neuropsychological effects of lead toxicity.BioMed Research International.
2014;2014:1-8. doi:10.1155/2014/840547
Childhood Lead Poisoning Prevention: Pregnant Women.
Centers for Disease Control and Prevention.
