Painting a tilebacksplashcan significantly transform the spacedemolition is unnecessary.
For most tile materials, it’s best to useepoxy-based tile paint.
Epoxy paints require a long drying and curing timeup to 24 hoursand are relatively expensive.
The Spruce / Kevin Norris
However, they are ideal for high-impact areas like tile backsplashes in kitchens and bathrooms.
Safety Considerations
Properly ventilate the area and wear breathing protection.
Air circulation will reduce the risk of breathing toxic paint fumes.
The Spruce / Kevin Norris
Lay plastic sheeting over the kitchen countertop and tape it close to the bottom of the tile backsplash.
Wipe down the tiles with a sponge until they are completely clean and grease-free.
Rinse the tiles with clear water and allow them to dry fully.
The Spruce / Kevin Norris
What Is TSP?
Trisodium phosphate(TSP) is a cleaner commonly used for heavy-duty dirt and stains, especially grease.
Repair Tile and Grout
Repair tiles showing signs of wear and tear.
The Spruce / Kevin Norris
Using a putty knife,fill in any cracks or chips with caulk.
Scrape away any excess caulk and allow it to dry.
Look for any flaws or cracks in the grout.
The Spruce / Kevin Norris
For minor repairs, apply the grout with a gloved finger.
For more extensive grout damage,remove the groutand replace it with new grout.
Sand the Tile Surface
Use anorbital sanderequipped with 100-gritsandpaper.
The Spruce / Kevin Norris
Lightly scuff the tile, taking care not to damage the tile’s surface.
When finished, wipe away any sanding debris using a damp cloth.
fast facts
Most tiles are finished with a layer of glaze for protection.
The Spruce / Kevin Norris
This glaze must be removed for the paint to adhere to the tile.
Apply Bonding Primer
Pour a small amount of bonding primer into a lined paint tray.
Dip thepaint rollerinto the primer and roll out the excess on the tray until the roller is nearly dry.
The Spruce / Kevin Norris
Roll the primer onto the tile, applying a thin coat to avoid dripping.
After the bonding primer has dried, apply a second thin coat and allow to dry completely.
Apply Tile Paint
Place a new liner in the paint tray and add some tile paint.
The Spruce / Kevin Norris
Dip the roller in the paint.
Roll out the roller on the tray until it is almost dry.
Let the paint dry.
When the first coat is dry, apply a second coat of tile paint.
If needed, add a third coat after the second coat has dried.
Stencils are a great way to do this.
Stencil when your painted tile backsplash is fully dry.
When fully cured, apply two coats of a clear polyurethane sealer to protect the paint.
Once the sealer has dried, remove the painter’s tape.
it’s possible for you to apply a solid paint color or use a stencil for a new design.
The tile needs to be clean and in good shape before painting.
Painting a tile backsplash is an effective way to give your kitchen or bathroom a new and refreshed look.
It is also less expensive than replacing the tile.
Painting does not fix major damage like a moldy sub-surface.
Another disadvantage of painting tile backsplash is that the paint may eventually scratch or peel.
