This six-foot DIY obeliskgarden trellisis so versatile and perfect for plants that love to climb and trail.

Use it as atomatocage or as a generalsupportfor any jot down of plant.

Grow trailing plants like wisteria, honeysuckle,snapdragons.

Tall DIY wooden obelisk trellis with planted pots hanging and surrounding fixture

The Spruce / Liz Moskowitz

At the top is space for a lightweight planting pot.

Anchor the trellis to the ground by burying the legs.

Choose a lightweight resin, rubber, or metal pot rather than a heavyterracottaor stone-like pot.

Materials and tools to build a DIY obelisk trellis

The Spruce / Liz Moskowitz

Watering makes the pot heavier.

Measure up and mark 6 inches from the bottom as the placement point for the bottom 24-inch rung.

Place a 24-inch cut piece across the two 72-inch pieces as the first rung.

Pieces of wood cut in various sizes and laid on grass

The Spruce / Liz Moskowitz

The top-left corner of the bottom rung should be flush with the outer edges of the legs.

Use only one screw per attachment point to allow the wood pieces to be adjusted.

Fasten the Top Rung

Fasten the top 8-inch rung at the very top of the legs.

Bottom rung of trellis marked with pencil and measuring tape

The Spruce / Liz Moskowitz

Again, the top corners of the rung should line up with the edges of the legs.

Check for Square

The top and bottom rungs of the ladder should be parallel.

Check this with the tape measure.

Wooden pieces secured on table and angled toward each other

The Spruce / Liz Moskowitz

Adjust the legs as needed.

Starting at the top and progressing downward, mark the positions with the pencil.

Attach the pieces with the 3-inch screws.

Bottom rung of trellis fastened with electric drill

The Spruce / Liz Moskowitz

Build a Second Ladder

Duplicate the previous steps to make the second ladder.

Attach Ladders on One Side

Position the ladders on their sides.

Attach the remaining rungs so they connect the two ladders and overlap the ends of the ladder rungs.

Top rung fastened with electric drill to angled wooden pieces secured on table

The Spruce / Liz Moskowitz

These should be at the same levels as the ladder rungs.

For a rustic look, leave the wood to weather on its own.

Cedar weathers to a silvery-gray color.

Bottom rung checked with measuring tape to top rung of trellis

The Spruce / Liz Moskowitz

Whitewood should be painted or stained and coated.

Pressure-treated wood can be painted or left as-is.

Keep the bottoms of the legs protected.

Middle rungs dry-fitted to trellis on work table

The Spruce / Liz Moskowitz

If you choose to bury the legs for stability, paint the legs for protection.

Ground-contact pressure-treated wood does not need to be painted.

Obelisk trellises are good for vining andclimbing plants.

Middle rungs on trellis fastened with electric drill

The Spruce / Liz Moskowitz

They allow vines to wrap around the trellis while still providing sufficient airflow throughout to keep plants healthy.

A tuteur is a garden structure that holds and trains crawling and trailing plants.

Duplicate sides of fastened trellis stacked on each other next to electric drill and wooden pieces

The Spruce / Liz Moskowitz

Open sides of trellis fastened with small pieces to create obelisk shape

The Spruce / Liz Moskowitz

Open sides on opposite end of trellis secured with yellow electric drill

The Spruce / Liz Moskowitz