For most people, a standard masonite pegboard is more than capable of handling all types of storage needs.
Additionally, pegboards are sold in different size panels.
Keep this in mind when purchasing and be sure to properly measure your space beforehand.
The Spruce / Shannon & Colleen Graham
Safety Considerations
Choosing the wrong pegboard for your space or installing it poorly can have frustrating consequences.
The process can easily be modified for different pegboards and different mounting surfaces.
This allows the hooks to pass through the holes in the pegboard and anchor on the back.
The Spruce / Shannon & Colleen Graham
The main furring strips will rest along the top and bottom horizontal edges of the pegboard.
To create these, cut two 1x2 furring strips to the length of the pegboard.
Use a level to ensure each mark rests along a level line.
The Spruce / Shannon & Colleen Graham
Use self-drilling 2 1/2-inch wood screws to mount the upper furring strip to the wall along the level line.
Tip
When working with pine furring strips, pre-drilling your holes will help circumvent splitting.
Self-drilling wood screws can also be an effective option.
The Spruce / Shannon & Colleen Graham
Mount Additional Supports
Any additional supports are up to you and your intended uses for the pegboard.
For extra strength, use the same 2-1/2-inch wood screws as before fitted with washers.
Start by screwing into the center support, then place a screw in each corner.
The Spruce / Shannon & Colleen Graham
Place more screws into the remainder of the furring strips spaced approximately 8 to 12 inches apart.
To do this, first prime the entire surface with a bonding primer.
The fibers in the masonite won’t tolerate moisture at all.
The Spruce / Shannon & Colleen Graham
Painting the pegboard will offer some protection, but moisture should still be avoided at all costs.
Additionally, using the appropriate pegboard accessories is key to a long-lasting pegboard.
verify to leave at least a 1/2 gap behind your pegboard.
The Spruce / Shannon & Colleen Graham
Yes, you’re free to hang pegboards directly on studs.
You should hang or mount your pegboard with furring strips.
confirm to mount 1/2 inch off your wall.
The Spruce / Shannon & Colleen Graham
On average, a pegboard can hold up to 100 pounds.
The Spruce / Shannon & Colleen Graham
