Simply cut the boards to length, glue them in place, then finish to your liking.
Give it a rustic edge, some coastal charm, or keep it polished to perfection.
With thisDIY mirror frame,the choice is yours!
The Spruce / Sanja Kostic
If you want a more rustic look, choose something like knotty pine.
Like the airy, coastal look of a whitewashed frame?
Choose natural wood with not so many knots.
The Spruce / Sanja Kostic
For a picture-perfect, traditional finish, look no further than primed MDF trim pieces.
What Is MDF?
MDFstands for medium-density fiberboard.
The Spruce / Sanja Kostic
Trim is sold in a variety of lengths, so factor in your cuts to minimize waste.
Once cut, use a sanding block to remove any splinters.
Start with the bottom piece and apply a generous bead of adhesive near the outside edge of the board.
The Spruce / Sanja Kostic
This will prevent the glue from reflecting in the mirror once the boards are installed.
Finish the frame by gluing the top piece in place.
Fill Imperfections With Caulk
Carefully remove the painter’s tape once the glue has fully dried.
The Spruce / Sanja Kostic
Fill any loose miter joints with paintable caulk.
Wipe clean and let dry.
Skip this step if you are using natural wood that will not be painted.
The Spruce / Sanja Kostic
Finish Frame
Finish the boards in your preferred method.
For a rustic look, choose a weathered stain color.
For a cleanpainted look, simply paint with your desired color of latex paint.
The Spruce / Sanja Kostic
For an even morecustom look, enhance your mirrors with decorative hardware on the outside.
Key supplies include: heavy-duty adhesive, trim boards, and a miter saw or miter box and saw.
The most difficult part is prepping and cutting the trim boards.
The Spruce / Sanja Kostic
Hands-on time includes measuring, cutting, and gluing the trim boards to the mirror.
Examples that would work well include knotty pine, natural wood, MDF, millwork, or flat boards.
The Spruce / Sanja Kostic
