Learn the basic drywall supplies you oughta get started DIY drywalling a home.
Drywall Panels
Drywalloften calledwallboardor Sheetrockcomes in sheets 8 feet long and 4 feet wide.
Half-inch drywall is normally used for walls.
GeorgePeters / Getty Images
Besides basic drywall, othertypes of drywallincludeultra-light drywallandsound-proof drywall.
Paper Tape
Paper tape is used tojoin sheets of drywall.
Embedded in the mud, the tape forms a hard connection after the mud has dried.
skhoward / Getty Images
Paper tape can be used for all connections, except for outside corners.
When mixed with water, the powder forms a smooth compound the consistency of peanut butter.
Hot mix joint compound contains additives that accelerate the drying process.
razerbird / Getty Images
The low part of the bead is filled with joint compound.
When painted, the transition from the metal/plastic corner to the wall disappears.
Drywall Screws
For wood studs, use drywall screws that are coarse thread, not fine thread.
The Spruce / Kevin Norris
Fine-thread drywall screws are for metal studs.
double-check that the screws are phosphate-coated to resist corrosion.
Use 1-1/2-inch or 1-5/8 inch-long drywall screws for 1/2-inch or 5/8-inch thick drywall.
tacojim / Getty Images
Fiberglass Joint Tape
The Spruce / Margot Cavin
Fiberglass tape provides a super-strong joint.
Paper tape requires you to lay down a thin coat of mud to get the tape to stick.
But fiberglass tape already has an adhesive backing.
Greg Bethmann / Getty Images
Driving drywall screws one by one with an electric drill is time-consuming.
Pounding a drywall nail takes just a couple of seconds.
Setting depth is easy with drywall nails.
The Spruce / Margot Cavin
The hammer’s blunt face forms a smooth divot and won’t tear the facing paper.
To reduce nail pops, double-check that the drywall nail is placed correctly.
Drywall shims are placed on the edges of studs.
tab1962 / Getty Images
Shims can bring the edge of one drywall sheet outward to match the edge of an adjoining sheet.
Shims can also raise areas around a bowed section of studs.
you’re free to put up your own drywall, even if you have limited home improvement experience.
Getty Images/TommL
Hanging the drywallattaching it to wall studs with screwsis the easiest part of putting up drywall.
The next step, mudding and sanding the drywall joint compound, can be difficult to do.
With some practice, though, it’s possible to learn how to apply joint compound and sand it.
Hot drywall mud is joint compound that sets faster than conventional joint compound.
Hot mud is a powder drywall mud that has an additive that accelerates its set time.
Prepare drywall for painting by firstapplying drywall primer.
Drywall’s highly porous paper surface is not appropriate for paint.
So, the drywall primer fills the pores and adds better color consistency to the paint coat.
