This is especially important for wall construction but also comes into play with paving.
Here are brick pattern ideas for your patios and paths.
Courses refer to each layer or row of horizontal brick.
The Spruce / Madelyn Goodnight
The bricks are merely laid at 90-degree angles to one another in a zig-zag pattern.
The herringbone pattern is the strongest pop in of brick-laying pattern, making it excellent forpaving driveways.
Because of its ability to form curves without being cut, this is an ideal brick pattern for walkways.
Illustration: The Spruce / Madelyn Goodnight
This is apopular choice for patiosdue to its decorative value and ease of installation.
you might also mix things up by running the paving diagonally.
The basketweave pattern is a classic choice for this treatment.
Illustration: The Spruce / Madelyn Goodnight
Other straight-edged patterns also work well with a grid brick pattern, such as jack-on-jack and even pinwheel.
Half-Basketweave
The half-basketweave brick pattern is laid with two horizontal bricks butted against a single vertical brick.
In each grouping, the relative positions of the three bricks alternates from row to row.
Illustration: The Spruce / Madelyn Goodnight
The visual effect is similar to that of the basic basketweave but slightly more complex.
It is nothing more than bricks laid in perfectly aligned rows.
The effect couldn’t be more orderly and geometric.
Illustration: The Spruce / Madelyn Goodnight
This pattern is more commonly used in wall construction than inoutdoor paving.
Wall brick is always mortared, so the bricks do not shift.
In paving, any movement in the brick distorts the neat lines of the pattern.
Illustration: The Spruce / Madelyn Goodnight
However, jack-on-jack works well for grid patterns oredged pathsbecause the grid or edging keeps the brick from shifting.
Pinwheel
The pinwheel bond will require somebrick-cutting skills, but it is an interesting and great-looking pattern.
As you’ve got the option to see, it is a geometric representation of a basic pinwheel.
Illustration: The Spruce / Madelyn Goodnight
Whorled
The whorled brick pattern is just one example of a very complexand very time-consumingbrick pattern.
It involves tricky, precise cuts on more than half of the bricks.
Brick Patterns for Walls
There are variousbrick patterns for walls.
Illustration: The Spruce / Madelyn Goodnight
These patterns include both header courses and running courses.
Learn more about the different types of brick patterns for walls below.
Header courses show up at either every fifth, sixth, or seventh course (row).
Illustration: The Spruce / Madelyn Goodnight
Flemish Bond
The Flemish bond brick pattern is made up of stretcher bricks and header bricks.
In each row, stretcher bricks and header bricks alternate.
Yes, you could lay bricks sideways.
This can help with the strength and stability of the structure you’re building.
The best pattern for a brick patio is the herringbone pattern.
This provides the strongest bond possible.
Laying brick is not difficult.
In fact, it is considered to be one of the more easy-to-learn construction skills.
However, you should still do your research and get proper instruction before bricklaying yourself.
Manytypes of bricks, such as clay bricks, will need to be wet prior to laying them.
However, pressed or extruded bricks of low porosity should not be dampened before laying them down.
