Most DIYers have at least one drill around the home for various tasks, likehanging a TVor running wires.
Check out this guide to learn more about these 10types of drillsand how to choose.
You will feel and hear it clamping tight if there’s a ratcheting function.
The Spruce / Kelsey Hansen
If the bit has a significant wobble, it might be off-center.
Loosen the chuck, re-center the bit, and tighten to fix.
These drills are used for lighter jobs.
The Spruce / Kelsey Hansen
Hobbyists or circuit tinkerers favor the Mudder hand drill, which is highly rated for precision use.
It comes with a wide selection of bits for multiple purposes.
The driver setting slows the rate of rotation and increases the torque to drive fasteners like screws and bolts.
The Spruce / Kelsey Hansen
Tip
Keep two hands on the tool when drilling a hole for better control.
A standard wood drill bit would chip and likely break due to the concussive force.
These drills are used for various jobs, like running water lines through the foundation of a new home.
The Spruce / Kelsey Hansen
The average DIYer won’t use a rotary hammer drill much, though they are prevalent in several professions.
They’re also available in pneumatic and corded versions.
Impact drivers are not best for drilling holes.
The Spruce / Kelsey Hansen
It’s better to rely on a standard drill or drill driver when a drill hole is required.
Drywall screw guns are narrow, lightweight tools that operate essentially the same as an impact driver.
Many models come equipped for use with collated drywall screws for even faster installation.
The Spruce / Kelsey Hansen
A right-angle drill driver is an excellent option for working in tight locations like under sinks or inside ceilings.
These tools are made for convenience and mobility, so they are typically battery-powered.
These portable tools often have a built-in battery that needs to be charged before the screwdriver can be used.
The Spruce / Kelsey Hansen
You canuse an electric screwdriverinstead of a regular screwdriver to save time and effort.
Pause working with a tool if it or the battery gets hot.
Allow the unit to cool down to prevent damaging the motor or battery.
The Spruce / Kelsey Hansen
Not only are the drill holes accurate, but they are also repeatable.
Connect a pneumatic drill to an air compressor or a built-in pneumatic system when using it.
However, this isn’t to say that DIYers cannot use pneumatic drills.
The Spruce / Kelsey Hansen
These tools are called post-hole augers, earth augers, or earth drills.
Instead, rent a ground auger for a short period to complete your project and save some money.
Choosing a Drill
Various drills are designed with strengths to help the user accomplish a specific task.
BirdofPrey / Getty Images
Rent the tool from a local home improvement store to dig any fence posts you need.
Pneumatic drills are typically used in industrial and commercial workshops.
Consider the list of drill types above and grab the drill that best suits your needs.
AleksandarNakic / Getty Images
Traditional drills are for general use.
Carbide bits are the strongest drill bits, able to cut through hardened steel.
Next are titanium and cobalt drill bits.
The drill bit comes equipped with a center screw.
